Safecam 360°Panorama Security Camera Wireless Outdoor,Keilini Light Bulb Security Camera HD 1080P Wireless Light Socket Smart Cameras for Home Security,Motion Detection,Two-Way Audio (Black 2Pcs)

Price: $56.99
(as of Feb 27, 2023 12:30:21 UTC – Details)

Product Description

Product parameter:

Night vision range: 15-20 meters

Support factors: for IOS, for Android 4.0 or above

PTZ angle: horizontal 355° vertical 90°

Function: motion detection/voice intercom/infrared mode automatic switching

Audio parameters: built-in microphone/speaker

Wireless network: support wifi wireless network (2.4G,5G)Hz.

pruduct size：17.5×6.5cm

Easy wireless installation:This camera can be installed with an ordinary E27 bulb base (110V~240V) without additional installation steps. Then you only need to connect the camera system to the router, open the application and set the camera minutes in it.

Remote viewing and night vision: Our camera can control the viewing angle through APP, you can remotely view it anytime and anywhere through for iPhone/for Android for phone/for Ipad, you can see clear images even in complete darkness.

Motion detection and real-time alarm: This pan-and-billiard surveillance camera uses a highly sensitive motion sensor. Once connected to the Internet, the camera detects the movement of an object, it will record the motion picture and notify you through the APP.

Two-way audio: Built-in microphone and speaker. You can talk with your family anytime and anywhere.

Horizontal 355° Vertical 90°: You can control the camera’s viewing angle through the APP to achieve 360-degree viewing without blind spots.

Full color day and night: Day and night modes auto switch. Even in darkness,light bulb camera can return a clear images. you also can set full color night vision-on manually.

SPECIAL NOTE: Because the cloud storage function requires a subscription, it is recommended to use an SD card to store videos.

COMMON Questions & Answers

Q: Can’t turn on the power? The camera does not work? Indicator light not blinking?

A: Bulb cameras do not have batteries, you need to install into the light socket and power up the socket. When you power it on, wait a minute, bulb camera will rotate and self-test, indicating that it can work properly. Please be aware that the status light will not flash, this is normal.

Q: Won’t connect to internet/wifi/network?

A: 1.Please ensure that the bulb camera can be powered on and self-tested properly. 2.Please install it close to the router, the camera requires a strong WiFi signal. 3.Please ensure that your WiFi information is entered correctly. 4.Please reset the bulb camera, it will take longer to set up the first time.

Q: Why can’t my phone receive alert notifcations?

A: 1.Please make sure you have turned on the motion detection alert switch and set the appropriate alarm sensitivity. 2.Please make sure your phone system permissions allow our App’s to perform message push. 3.Please confrm to open the message push settings in the App, open the App, click Me→ Message Center, click the button in the upper right, enable notifcations. 4.Alarm interval 1-3-5 minutes, which means only one alarm can sound during the period.

Q: Micro SD memory card requirements?

A: 1.Only FAT32 format is supported. 2.Maximum memory capacity: 128GB. 3.Micro SD memory card size: 1.5 x 1.1 cm.

Q: Display offline?

A: 1.Confrm whether there is a power failure from the router or network disconnection, if so, it takes a while for the router to restore the network, check again after 2 minutes if the device is back online. 2.Ensure the router has been replaced or the WiFi name, password, etc. have been modifed, if so, the device needs to be removed and re-added. 3.Check whether the frmware is the latest version, App side check path: Home – click the device icon – click the top right button – check for updates. 4.If the device appears offline after using for a period of time, but after restarting the router or rewiring the device, the device is back to normal, it means that the router is overloaded due to long-term high load use, you need to replace a router with a stronger load capacity or reduce the number of devices connected to the router. 5.Remove the device from the app and then reset the bulb camera by inserting a long pin into the reset hole. Wait for the self-test to complete and then go to pair and connect the camera again.