105dB Wireless Alarm System Infrared Motion Detector Home Security Wall Detector Detector

Price: $17.45
(as of May 11, 2023 15:23:21 UTC – Details)

Instructions:
1. Turn on the power switch, if the power-on indicator flashes,  it means that the white check is normal.
2. The remote infrared alarm has a standby delay of 20 seconds immediately after powered on and does not detect the alarm signal within 20 seconds. You must leave the electronic dog’s detection zone within 20 seconds.
3. After 20 seconds, if someone enters the detection zone, the remote infrared alarm will have a 5-second delay, facilitating the owner to identify. if no identification signal of the control is received after 5 seconds, the alarm will issue a harsh sound for 30 seconds with an alarming volume of 105 DB. 5 seconds after the alarm sound ends, if the remote infrared alarm is touched for the second time, it will alarm again and the cycle will repeat over and over.
Specification:
Condition: 100% Brand New
Material: ABS
Color: White
Operating Voltage: DC 6V
Battery: 4*AA(Excluded)
Detection Distance: 10m
Detection Angle: 120°
Remote Control Distance: >30m(Open)
Alarm Sound Level: 105dB
Package Weight: Approx.185g/6.5oz

Package List:
1 * Alarm Sensor
2 * Control
1 * Mounting Bracket

Note:
1. During installation, please pay attention to the angle and height of the detector’s horizontal plane, which has a great impact on the protection zone.
2. During installation, please avoid putting the infrared remote alarm close to the cold and heat sources like hot and cold air outlet, air conditioning air outlet, electric heater, air cooler, etc., and avoid putting it straight to the door.
3. There shall be no barriers in the protection zone of the infrared remote alarm.
4. There shall be a 10~30° angle between the infrared remote alarm and the wall, but the angle may as well be adjusted depending on the actucal mounting circumstances.
After 20 seconds, if someone enters the detection zone, the remote infrared alarm will hae a delay of 5 seconds, which will facilitate the identification of the owner. if no command identification signal is receied after 5 seconds, the alarm sounds hard for 30 seconds with an alarming 105 DB. 5 seconds after the end of the alarm sound, if the remote infrared alarm is touched for the second time, the alarm sounds again
When the remote infrared alarm is alarming, you can. Precise identification. The owner’s identification delays the alarm, reaching a high accuracy rate.
100% brand new and top quality. Wireless infrared motion sensor with a 105 dB audible alarm.
Easy to install with adjustable mounting bracket. Suitable for arious enironments such as houses, offices, courtyards, shops, etc.