UHPPOTE 125KHz RFID Stand-Alone Door Access Control Keypad Support 500 Users

Price: $19.90
(as of Feb 11, 2023 20:43:13 UTC – Details)

Product Description

Features:

Full programming from the keypadHigh quality and high securitySensitively and response quicklyClassical appearance with useful functionDesigned for home and officeSupports Card, PIN, Card + PIN, Card or PINAdjustable door open time (0-99 seconds)Very low power consumptionLock output current short circuit protectionBuilt-in buzzer; No keypad backlightRed, blue, white, yelolw and green LED indicators display the working statusIt is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.

Specification:

Operating Voltage: 12VDCLock Output Load: Max. 1.5AIdle Current: 50mARFID Card Capacity: 500User PIN Capactity: 500PIN Digits: 4-8 digitsCard Type: Standard 125KHz EMDoor Relay Time: 0-99 secondsCompatible Cards: EM compatible card (Can’t support some encrypted cards,such as HID, Indala, Cobra, APCiK ,Paradox, Radio, Honeywell, etc.)External Reader: Not supportWaterproof: Not supportKeypad Backlight: Not supportShell Material: PlasticProduct Weight: 100g / 3.5ozCard Reading Distance: Max. 6cm (2-23/64″)Shell Size: 100x100x18.5mm (3-15/16″ x 3-15/16″ x 47/64″)Door Open Options (admin user selectable): Card Only / Password Only / Card + Password / Card or PasswordWorking Temperature: -30°C-60°C / -22°F-140°FWorking Humidity: 10%-90%RH, non-condensingWiring Connections: Electric Lock, Exit Button, External Bell

Package List:

1 x Access control keypad1 x English user manual4 x Rubber plugs used for fixing the shell4 x Self-Tapping screws used for fixing the shell

Humanization Design：

High-performance 32-bit MCU:

It uses high performance 32-bit MCU mainstream microcontroller which could offer a high level of integration to ensure the stable performance. In addition, the MCU microcontroller also combines the optimized dynamic consumption with a comprehensive set of power-saving modes to make the power consumption lower.

High Performance:

The switch mode power supply (SMPS) solution which adopts the synchronous step-down DC-DC converter can greatly reduce the heat generated by the circuit board.Power relay provides excellent switching performance for electric locks.

Multi-colored Light Indicator:

Red shows the device is in the standby modeGreen shows the operation is successfulBlue shows the device is in the programmimng modeLED indicator flashes red 3 times to show that the operation is failed

Common Power Supply Diagram:

Type of Electronic Lock:

Fail-secure lock (locked when power removed), such as electronic controlling lock, smart lock, etc.Fail-safe lock (unlocked when power removed), such as eletromagnetic lock, electronic bolt lock, etc.

Principle of Electronic Lock:

The relay will close contact to unlock the lock and will release after unlockingCOM: Common, relay contactNC: Normal close, normally keep closed to COMNO: Normal open, normally keep opened to COM

Special Power Supply Diagram:

Remove the back cover from the keypadDrill 4 holes on the wall for the self-tapping screws and 1 hole for the cablePut the supplied rubber plugs into the 4 holesFix the back cover firmly on the wall with 4 self-tapping screwsThread the cable through the cable holeAttach the keypad to the back cover

✅Contactless RFID transponder technology
✅Full programming from the keypad; Doesn’t need to connect on the computer, can works alone
✅The access control machine is made of high quanlity ABS plastic and the panel is made of hard shell rubber film.
✅Lock output current short circuit protection
✅It is widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.