Sensky BS010W DC 12v to 30v PIR Motion Activated Sensor Switch DIY LED Lighting ( Delay Time, Sensor Distance Adjustable )

Price: $10.99
(as of Feb 15, 2023 17:31:52 UTC – Details)

Product Description

Model Number
BS010L BS010 BS010WL BS010W

Delay Time
5-25sec (2~280 Seconds adjustable) 5-25sec (2~280 Seconds adjustable) 5-25sec (2~280 Seconds adjustable) 5-25sec (2~280 Seconds adjustable)

Detection Range
4M-7M (10cm-7M adjustable) 4M-7M (10cm-7M adjustable) 4M-7M (10cm-7M adjustable) 4M-7M (10cm-7M adjustable)

Light Sensor
20lux (10~300Lux adjustable) No Light Sensor 20lux (10~300Lux adjustable) No Light Sensor

Voltage
DC 12V-30V DC 12V-30V DC 12V-30V DC 12V-30V

Load current
≤ 3A ≤ 3A ≤ 3A ≤ 3A

Description:

PIR(Passive infrared) Motion sensor is pyroelectric device can detect human movement by detecting Infrared ray emitted by human body. Widely used on the Motion-activated lighting, LED strips Security System, automatic sensory device and more…

Specifications:

Operating voltage: DC 12V-30V

Load current: 3A

Detecting range: About 110 degrees cone angle

Trigger way: continuous triggering

Blockade time: 0 seconds

Attention:

1. Don’t exposed to direct sun light or lighting, big wind, near a heater or air condition.

2. Don’t fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though.

3. Don’t fix it in strong shock or vibration environment.

4. The PIR Sensor requires a ‘warm-up’ time in order to function properly, about 10s to1min,depend on the delay time; during this time, the signal triggered by the module is not stable, after one minute, it will be ready.

Is Discontinued By Manufacturer ‏ : ‎ No
Product Dimensions ‏ : ‎ 13.78 x 1.54 x 0.98 inches; 1.06 Ounces
Item model number ‏ : ‎ BS010W
Date First Available ‏ : ‎ June 1, 2014
Manufacturer ‏ : ‎ SENSKY
ASIN ‏ : ‎ B00KTCTV8G

【Warm Tips】: To figure out your values for the Sensitivity , Please set the delay time to its minimum value first , this will save your time.
【Motion Activated】: Sensor function triggered by motion, you can use this small motion sensor switch to control lighting like Led strip lighting.
【Delay Time Adjustable】: The delay time controls how long the light stays on once it gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time.
【Sensitivity Adjustable】: The sensitivity controls how close you need to be to the sensor in order to activate it.
【Wide Application】: You can use this sensor switch in different occasions like entryway lighting, cabinet lighting, gun safe lighting, pantry lighting, under the bed rails lighting.