HWMATE Waterproof Zinc Alloy Metal Case RFID 125khz Access Control Keypad Work Stand-Alone for Security System

Price: $41.39
(as of Feb 21, 2023 00:07:33 UTC – Details)

Product Description

Features:

The unit is single door multifunction standalone access controller or a Wiegand output keypad card reader. It is suitable for mounting either indoor or outdoor in harsh environments.Strong Zinc Alloy Electroplated anti-vandal caseWaterproof, conforms to IP68Full programming from the keypad2000 users, supports Card, PIN, Card+PINCan be used as a standalone keypadBacklight keysWiegand 26 input for connection to external readerWiegand 26 output for coonection to a controllerAdjustable Door Output time, Alarm time, Door Open time

Very low power consumption (30mA)Fast operating speed, <20ms with 2000 usersLock output current short circuit protectionEasy to install and programBuilt in light dependent resistor (LDR) for anti tamperBuilt in buzzerRed, Yellow and Green LEDs display the working status

Specifications:

Operating Voltage 12VDC User Capacity 2000 Card Reading Distance 3-6cm/1.18-2.36in Frequency 125KHZ Active Current < 60mA Idle Current 25±5mA Lock Output Load Max 3A Alarm Output Load Max 20A Operating Temperature -45~60°C/-49~140°F Operating Humidity 10%~90%RH Adjustable Door Relay Time 0-99 seconds Adjustable Alarm Time 0-3 minutes Wiegand Interface Wiegand 26 bit Wiring Connections Electric Lock, Exit Button, External Alarm Product Size (LxWxH) 120x58x22mm / 4.72×2.28×0.87in Net Weight 370g / 13.05oz

Installation:

1. Remove the back cover from the keypad using the supplied special screw driver

2. Drill 2 holes on the wall for the Self tapping screws and 1 hole for the cable

3. Put the supplied rubber bungs into the 2 holes

4. Fix the back cover firmly on the wall with 2 Self tapping screws

5. Thread the cable through the cable hole

6. Attach the keypad to the back cover

Packing List: 1 x Keypad 1 x English User Manual 2 x Rubber plug 2 x self tapping screws 1 x Diode

Waterproof, conforms to IP68
Full programming from the keypad
2000 users, supports Card, PIN, Card+PIN
Built in light dependent resistor (LDR) for anti tamper
The unit is single door multifunction standalone access controller or a Wiegand output keypad card reader. It is suitable for mounting either indoor or outdoor in harsh environments