5 Inch 4 in 1 CCTV Monitor Tester, AHD/TVI/CVI/CVBS Coaxial Analog Video Monitor Tester, UTP/PTZ Cable Test for 1080P/3MP/4MP/5MP Analog Security Camera, VGA DC12V Output Camera Portable CCTV Tester

Price: $145.99
(as of Feb 08, 2023 02:29:01 UTC – Details)

Product Description

Troubleshoots

IP camera can not be tested.

This tester not supports any IP cameras testing, it can only be used to test analog cameras.

The tester can not produce pictures.

When the device is switched to CVI mode, only connected to CVI camera can it produce pictures. If the camera is other TVI / AHD signal camera, the mode should be switched to TVI / AHD signal correspondingly, so that the connected camera can produce pictures but not flicker.

Must this be plugged in, in order to turn on or does the batteries need to be charged?

This tester is built-in battery, as long as the battery power is sufficient, you can turn it on normally, if not, that means that the battery power has been consumed, you need charge it, fully charge it and then you can unplug the power supply to use.

HDMI isn’t recognized.

If HDMI is used as the display input, it can only be connected to the NVR or DVR which with an input signal of HDMI. If HDMI is a signal output, it needs to be connected to the display or TV.

4 in 1 CCTV Tester(Not Support IP Cameras)

Tips

●To avoid the battery can’t charge next time. Don’t recharge it until the battery was completely used

●This tester NOT supports IP Camera

TVI camera test: HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When TVI signal input, the tester will display HD TVI camera image.

AHD camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When AHD signal input, the tester will display the AHD camera image.

CVI camera test: HD video surveillance testing, support 1MP, 2MP, 3MP, 4MP. When CVI signal input, the tester will display the CVI camera image.

CVBS: PAL/NTSC, 960H Camera, 800tvl/1000tvl/1 200tvl analog camera

PTZ Controller

Support RS485, compatible with protocols

PELCO-D/P, you can control the ratation of PTZ, up or down, left or right, and you also can adjust zoom, focus, aperture size.

Rechargeable

Power the camera with DC 12V (1A) power output from the tester. It is helpful for demo and testing when the power supply is not available. Built-in 18650 2600mA battery, after charging 3-4 hours, working time lasts 11 hours.

Video Signal Testing

Video monitor tester, high-resolution 5.0 inches 800 (RGB) x480 wide viewing angle display, Viewing angle larger, more intuitive and easy to display the camera image quality. Support PAL/NTSC standard video signal.

Enhanced network cable testing: By UTP CABLE TEST port on the meter, you can test the connection of network cable.

LED lamp: It is useful for the engineer to install and maintain security system at night; LED On/Off pressing button, easy to operate.

5 Inch CCTV Tester

Features

Audio testing: Test the audio input from pickup devices. Connect the tester and pickup device with the audio cable.

UTP cable test: Display UTP cable connection status, cable type and the sequence of wires as well as read the number of the test box.

VGA/HDMI input: Support VGA/HDMI 1.1 Compliant Digital input, once connect VGA/HDMI video, please switch selector to select HDMI or VGA mode.

Auto power off: 1-30 (mins) Working temperature: 14℉ ~ 122℉ (-10℃ ~ +50℃ ) Humidity: 30%-90% Rh Dimension: 221mm x 175mm x 91mm Weight: 1.65lb (0.75kg) Language settings: English, Chinese, Korean, Russian, Italian, French, Polish, Spanish, Japanese etc

Product Accessories

Adapter DC5V 1.5A (with USB cable) *1 Power output conversion cable *1BNC cable *1 RS485 connector *1International Standard 18650 2600ma battery *2 Lanyard *1Tool bag *1 HD coaxial tester *1Instruction Manual *1 Audio cable *1

Video Resolution
2MP 2MP 5MP 8MP

Manual Varifocal lens
2.8-12mm 2.8-12mm 5 inch 5 inch

Connectivity Technology
Wire Wire
✓

✓

Support up to HD TVI video surveillance testing, support 1MP, 2MP, 3MP, 4MP, 5MP. When TVI signal input, the tester will display HD TVI camera image.
Portable multi-functions CCTV tester with 5 inch TFT-LCD Screen(Not touch screen), 800*480 resolution, make your job more easily with this professional CCTV tester.
The CCTV tester builts in 18650 2600mA battery, after charging 3-4 hours, working time lasts 11 hours, long standby time. Small body, portable and easier to carry.
This camera tester also features a multi-purpose testing unit that includes built-in PTZ tester/controller, UTP cable test, audio surveillance test, and power output.
Support VGA/HDMI 1.1 Compliant Digital input, can be used for debugging DVR/NVR recorder, also can be a display.