ALMOCN VL53L0X Time-of-Flight (ToF) Ranging Sensor I2C IIC Breakout 940nm GY-VL53L0XV2 Distance Module for Arduino,Black

Price: $5.99
(as of Feb 23, 2023 19:19:26 UTC – Details)

Product Description

The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product.

Ranging measurements are available through the sensor’s I2C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.

PIN Description:

VDD-Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8 V input with VIN disconnected.)

VIN-This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I2C lines high to this level.

GND-The ground (0 V) connection for your power supply. Your I2C control source must also share a common ground with this board.

SDA-Level-shifted I2C data line: HIGH is VIN, LOW is 0 V

SCL-Level-shifted I2C clock line: HIGH is VIN, LOW is 0 V

XSHUT-This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted.

Package includes :

1 x VL53L0X Time-of-Flight Distance Sensor

The VL53L0X time-of-flight ranging sensor is new–generation ranging module, with a fully integrated sensor and built-in embedded infrared, eye-safe.
Working Voltage: 2.6V – 5.5V; Maximum Sensoring Distance: 2m
Ranging measurements are available through the sensor’s I2C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.
Advanced filter and ultra-high-speed photon detection array, the measurement distance is farther, and the speed and accuracy are higher.
VL53L0X is used in gesture sensing or proximity detection of various innovative user interfaces, as well as drones and Internet of Things (IoT) products.