icyber PIR Motion Sensor, 433MHz/eV1527 Wireless Motion Detector with LED Indicates , 110 Degree Wide Adjustable Detection, Compatible with icyber Home Security System Host

Price: $29.99
(as of Feb 22, 2023 03:49:53 UTC – Details)

Product Description

1.Mounting Strip

2.Bracket

3.Installation screws x2

4.Battery receptacle

5.CR2450 3V lithium battery.

6.Motion detect lens

7.Light indicator inside. Blinks for 3 seconds after detector powers on. Lights up when there’s

motion in the room. And blinks in case of low battery, please replace the battery soon.

8.Power on/off. Slide it to ON to power up the detector.

9.TEST & NORMAL switch. For effective walk testing, slide TEST/NORMAL switch to

TEST.When walk testing is done, slide it to NORM to save battery power. In NORM mode, if

the detector is triggered twice within 3 minutes, it enters sleeping state immediately. During this

period, any movement detected does not generate an alarm. After no movement within the

next 3 minutes, it goes back to working state again

Special considerations

*Don’t install PIR Motion Detector outdoors, in a garage and on the glass.

PIR Motion Detector can’t detect motion through glass, like if someone’s moving outside a

window.

*Don’t install in places where PIR Motion Detector could get wet, like swing-out windows that could

be rained on.

*Don’t install PIR Motion Detector within 3 feet (1 meter) of a heat source like an electric heater,

heat vent or fireplace or another source that may produce turbulent air.

*Don’t install PIR Motion Detector behind large appliances or furniture that may obstruct its motion

sensors.

Product Size
200*150*80MM 49×26×12mm (large) , 35×12.5×12MM (small) 90*90*70MM 200*150*80MM 200*150*80MM

【Compatible with icyber Home Security System】: This PIR motion detector MUST need to connect with the security panel to use. It can be also pair with other security panels, which wireless parameters: 433MHz, eV1527.
【110 Degree Detection】: Our this motion detector covers a wide range, with angle of 110 degrees, the communication distance with our security panel is 12m (in an open field).
【Friendly To Pet】: The motion sensor have been adjusted specifically to prevent pets from triggering alarms. Pets under 15kg will not trigger the alarmif they are not very very close to the sensor or move too much.
【Instant APP Notifications】: After paired with the alarm panel, if someone breaks in, it will send an alarm signal to the panel immedicately after detected, and the APP on your phone will also receive an alarm at the same time. So you will notice what happened anywhere and anytime.
【Battery Builted In】: The battery is pre-installed in the product, just turn on the switch before use, and then click the accessory on the panel, then clich sensor option to add and pair.