NFC RFID Card Copier Reader Writer Duplicator, WiFi Full Decode Smart Card RFID NFC Copier IC ID Reader Writer Duplicator, 10pcs ID125khz Cards+10pcs ID125khz Keyfobs+10pcs 13.56mhz IC Key

Price: $79.99
(as of Feb 03, 2023 20:43:08 UTC – Details)

Package included
1 x iCopy Card Copier
1 x Type-C USB cable
10 x ID 125khz Cards 
10 x ID 125khz Keyfobs 
10 x 13.56mhz IC Key

Specification:
1. Pre- programmed with unique 18-digit ID number in each card (The first 10 digitals is ABA code, the last 8 digitals is wiegand code.)
2. This RFID card is read only, can not been programmed
3. Operation Frequency: 125KHz
4. TK4100 Chip
5. Storage Capacity: 64bit
6. Communication Protocol: ISO 1 8000-2 
7. Standard ID compatible
8. Compatible standard ID door access devices or ID reader
9. Contactless transmission of data and supply energy 
10. Ideal for use in ID and access control
11. With card ID printing

How to use:
1.Wireless network connection: 
Power on the machine by pressing the “Power” key, press the “OK” key to enter the interface, press the up and down keys to select the “System Setup” function block, enter the “Wireless Network Setting”, select the wireless network that can be connected, click the “OK” key, click the “Edit” key, enter the password, select (END) and press the “OK” key, click the “OK” key again, and the “Connection succeeded” will be displayed. 

2.IC card copy: 
press the “OK” key to enter the user interface, select the “Cloud Decrypt” in the function block interface, press the “OK” key, put the original card into the sensing area, and click the “Read” key to prompt that the decryption is successful, indicating that the card has been decoded online. Replace the IC and copy the card to the sensing area. Press the “Write” key to prompt that the card is written successfully. If the message “decryption failed” is prompted, you need to connect the computer to decode. 

3.ID card copy: 
Select the “Smart Copy” and click the “OK” key. Put the original card in normal use, click the “Read” key, and the message “Read successfully. Change the copy card according to the frequency prompted on the display, and then press the” Write “key, and the message” Write successfully “indicates that the copy is complete. 

4.Connect the computer to decode:
The machine is connected to the computer via USB cable, there is a disclaimer when it is turned on. At this time, do NOT press the “OK” button on the machine. Enter my computer, open the removable disk and display the software, the software instructions inside are copied to the computer. Double-click to open the software, and then press the “OK” button on the machine. 

NOTE: if you press the “OK” button before opening the software, the software will not be displayed.
WIFI FULL DECODING: Complete decoding function, support cracking IC full encryption/Semi-encryption card.
COMPATIBLE WITH: Cards that support reading: IC, MF1, S50, S70, ID, TK4100, EM4100, HID26, HID35, HID37, GID64, GID32, SID32; Blank copy cards that support writing: UID, FULD, ICUID, T5577, EM4305, EL8265, 5200.
SUPPORT FREQUENCY: ID-125KHz, ID-175KHz, ID-250KHz, ID-300KHz, ID-375KHz, ID-500KHz etc.
EASY TO USE: Wireless network connection for cloud decryption,no computer required, more convenient, easy operation.
PREMIUM MATERIAL: High-Quality Copper Coil inside. Casing Material: ABS Plastic. Waterproof & Durable.