Oiyagai 2pcs SR602 Motion Sensor Detector Module Pyroelectric Infrared Sensory Switch

Price: $12.00
(as of Feb 23, 2023 13:50:36 UTC – Details)

Product Description

Oiyagai 2pcs SR602 Motion Sensor Detector Module Pyroelectric Infrared Sensory Switch

Working parameters:

Pyroelectric human body infrared sensor module, model: SR-602Sensing distance: up to 5 meters; recommended 0-3.5M.Output: high level, H=3.3V, L=0VPower supply DC: 3.3V-15VQuiescent current: 20uA

Applications:

Used for human body induction lamps, alarms, security, agriculture and forestry mining automatic equipment, etc.Used for access control on-demand camera, agricultural and forestry mining automatic equipment.

.

Feature:

High sensitivity, fast response, small static power consumption, small size, easy to install, and is installed.The lens, the pin header has been soldered, and the power supply is provided without debugging. Can be used for body sensor lights, alarms, security,Access control on-demand imaging, automatic equipment for agriculture, forestry and mining.Output:Switching Transducer;Theory:Optical Sensor;Usage:Position Sensor;Sensitivity:Adjustable

Specification:

Model Number:SR602;Type:Vacuum Sensor;SIZE:15mmx15mmx20mm;Sensing distance:3M-5M;Delay:Adjustable

Key points:

1. The high level time of the output of this product is adjustable, 2.5 seconds to 1 hour, the output time set at the factory.
It is 2.5 seconds, and you can change one chip resistor if you need to change it.Read the resistance value corresponding to the typical delay time.Please refer to the relevant form above.2. Blocking time, 2 seconds, not adjustable.3. The factory is defined as repeatable trigger and cannot be changed.4. The supply voltage of this module is 3.3V to 15V, and the limit voltage is 2.8V to 18V.5. Module output timing is: output high level for 2 seconds after power-on, then go low, enter standbystatus. If the delay time is changed, the time when the module outputs a high level after power-on will increase accordingly, which can be understood as
The startup time after entering the normal working state after the electric power will increase.6. After installing the photosensitive element, it does not work during the day, work at night, does not contain photosensitive components, and works all day ( There are no photodiodes on the module,please purchase separately if needed. Recommended: ordinary F3 photodiode )
It is considered that there is no photosensitive element installed.7. This module is very sensitive, pay attention to the installation position, try to avoid the heat source radiation source (air outlet / direct sunlight)8. The sensitivity of this module is adjustable, and you need to change a chip resistor grid.9. When soldering with 220V ordinary soldering iron, it is necessary to unplug the power supply before welding. It is recommended to use 24V low voltage soldering iron.

High sensitivity, compact size, lens installed, pin header is soldered, available power supply, no need for debugging
The output high-level time is adjustable from 2.5 seconds to 1 hour, and the output time set at the factory is 2.5 seconds. The blocking time is not adjustable.
After the photosensitive element is installed, it does not work during the day but works at night, if it doesn’t contain photosensitive components, it will work all day (the default is that no photosensitive components are installed)
It can be used for human body induction lamps, alarms, security, access control on-demand camera, agricultural and forestry mining automatic equipment.
Used for human body induction lamps, alarms, security, agriculture and forestry mining automatic equipment, etc.