PD132 Vehicle Loop Detector Single Channel Inductive Sensor Outdoor Buried Driveway for The Car Parking Lot

Price: $19.83
(as of Apr 02, 2023 11:05:54 UTC – Details)

Features:
The Vehicle Loop Detector is mainly used to detect the existence and passing of vehicles 
Sensitivity Boost : This feature sets the undetected level to maximum sensitivity and is used  to prevent loss of detection of high-bed vehicles
Switch Selectable Sensibility: 4 sensitivity setting are available on the switches to allow flexibility in configuration Switch Selectable Frequency: 4 frequency settings are available to prevent cross-talk between adjacent loops
Filter Option: This option is used to provide a delay between detection of the vehicle and switching of the output relay . This relay is normally used to prevent false detection of small or fast moving objects
Permanent Presence Option : This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods .

Specifications:
Supply voltage: 220VAC
Power: 4.5VA
Output relays: 240V/5A
Operating temperature: -20~65°C
Storage temperature: -40~85°C
Frequency range: 20 kHz to 170 kHz
Temperature compensation: 50°C/ h
Reaction time: 10ms
Signal holding time: Unlimited/limited
Sensitivity: Higher:0.02%; high:0.05%; low:0.1%; lower:0.5%;
Loop inductance:
Total loop plus connection wiring:
50μH to 1000μH. Ideal is 100μH to 300μH
Loop connection wiring:
200 meters long. The total resistance is less than 80hm, twisted at least 20 times per meter
Relative humidity: <90%No condensation
Weight: 283g

Package included:
1 x Vehicle Loop Detector
1 x manual

APPLICATION: The Vehicle Loop Detector is mainly used to detect the existence and passing of vehicles.
RESET SWITCH: The reset switch enables the detector to be manually reset during commissioning and testing. This results in the detector re-tuning the sensing loop and becoming ready for vehicle detection.
SELECTABLE PULSE TIME: This feature sets the length of time that the pulse relay will be energized for 1 Second or 0.5 Seconds.
PULSE RELAY SELECTION: The Pulse Relay may be configured to energize on detection of a vehicle or when the vehicle leaves the loop.
PERMANENT PRESENCE OPTION: This feature ensure detection of the vehicle will be maintained when the vehicle is parked over the loop for extended periods.