Seco-Larm SK-1123-FDQ Vandal Resistant Flush-Mount Access Control Keypad; 12~24 VAC/VDC auto-adjusting operation; Tamper output N.C. Dry contact/50mA@24VDC max; Mounts to standard single-gang back box

Price: $86.49
(as of Feb 16, 2023 08:23:37 UTC – Details)

Seco-Larm SK-1123-FDQ Vandal Resistant Flush-Mount Access Control Keypad; 12~24 VAC/VDC auto-adjusting operation; Tamper output N.C. Dry contact/50mA@24VDC max; Mounts to standard single-gang back boxSECO-LARM SK-1123-FDQ Vandal Resistant Flush-Mount Access Control Keypad; 12~24 VAC/VDC auto-adjusting operation; Tamper output N.C. Dry contact/50mA@24VDC max; Mounts to standard single-gang back box
Key Features

• All features are programmed directly from the keypad: No need for an external programmer
• EEPROM Memory protects programmed information in case of power loss
• Duress code signals a silent alarm if an authorized user is forced to open the door under duress
• Egress input lets users exit the premises without keying in the code
• Door sensor input for anti-tailgating operation
• Interlocking input for connecting to a second keypad
• IP66 Weatherproof rating

Specifications

• Operating Voltage: 12~24 VDC/VAC
• Current Draw- Standby: 15mA@12VDC
• Current Draw- Output 1 Active: 65mA@12VDC
• Current Draw- Output 1 & 2 Active: 66mA@12VDC
• Current Draw- Keypress: 40mA@12VDC
• Total Max Current Draw: 100mA@12VDC
• Output- #1 Form C: 1A@30VDC
• Output- #2 Transistor Ground: 100mA@24VDC
• Output- Duress: 100mA@24VDC
• Output- Interlock: 100mA@24VDC
• Output- Tamper: 50mA@24VDC
• Input- Egress: N.O. Ground
• Input- Door Sensor: N.C. Ground
• Input- Door Inhibit: N.O. Ground
• IP Rating: IP66
• Operating Temperature: -4°~158°F
• Operating Humidity: 5~95% Non-condensing
• Dimensions: 4-3/4″x3-1/8″x1-13/16″
• Weight: 16.2-oz

Dimensions: 4-3/4″x3-1/8″x1-13/16″, Up to 1,000 possible user codes (000~999) programmable for output #1 and 100 (001~100) for output #2
Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)
Outputs #1 and #2 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)
Keypad illuminates when a button is pressed, backlight can be programmed for FULL or AUTO in standby mode
Up to 50 (01~50) duress codes for output #1, 10 (01~10) for output #2