UHPPOTE Proximity RFID Card Keypad Reader 125KHz Wiegand 26 Bit for Door Access Control System

Price: $22.90
(as of Feb 16, 2023 17:15:34 UTC – Details)

Product Description

Warm Tips

Confirm the voltage (12VDC) and differentiate positive anode and cathode of the power supply.About the wiring between the reader and the controller, the wire should be 22 AWG at least and the length should not exceed 100 meters.When external power is used, suggest to use same power GND with controller panel. It is recommended to use multi-strand twisted pair cable to connect card reader to access controller.Please don’t wire the LED and BEEP wires if ther is no need to prompt light and buzzer feedback.

Wiegand Format:

The standard 26-bit Wiegand format is an open format; it is a widely-used industry standard. Almost all access control systems accept the standard 26-bit format which consists of 2 parity bits, 8-bit facility code, and 16-bit card number fields. The Wiegand interface is commonly used to connect a card swipe mechanism to the rest of an access control system.

Introduction

The RFID card reader can’t work-alone and it needs to work with Wiegand protocol access controller, such as access control panel or master controller.It uses ST MCU to ensure stable performance, and low-power circuit makes the service life longer.

Features

The maximum reading distance is 6cm.Waterproof, conforms to IP66.It is useful for safety door system, easy to connect and use.Ultra-low power consumption, the standby current is less than 50mA.Support wiegand 26bits or wiegand 34bits output format.Fast response speed, the door opening time is less than 0.3s.This device uses high performance 32-bit MCU to ensure stable performance, and low-power circuit makes the service life longer.Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.This RFID card reader can’t work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.

Remarks

This card reader will prompt sound and light indication only when the LED and BEEP cables are connected to the access controller.Please connect the Black and Gray wire together for wiegand 34bit output.

Specification

Working Voltage 12VDC Static Current ≤50mA Card Type Standard EM-ID Transmit Frequency 125KHz Working Temperature -40 to +140°F Working Humidity 10%-90%RH Waterproof Rating IP66 Enclosure Material ABS Plastic Panel Material PC Plastic Button Materrial Silica gel Enclosure Color White Enclosure Size 3-25/64″ x 3-25/64″ x 45/64″ Communication Distance Less than 328ft Lead Cable Length 9-27/32″ [250mm] Status Indication Bi-color LED + Buzzer Product Weight 5.3oz

Certification FCC Buzzer 1 beep mean successful, 3 beeps mean failed Wiegand Output Wiegand 26 bit or Wiegand 34 bit (Selectable) LED Light Red means standby, Green means activated

Package List:

1 x Wiegand Reader1 x English User Manual4 x Plastic Anchors4 x #7 x 1″ Self-Tapping Screw

Remarks:

Frequency: 125KhzCard Type: EM-ID Card (Can’t support HID, Cobra, APCiK etc.)Please notice that our wiegand reader can’t be compatible with some encrypted cards, such as HID, Indala, Cobra, APCiK, Paradox, Radio, Honeywell, etc.Can’t work alone, need work with access control panel. (Please search ASIN: B00UX02JWE to get the access control panel)

The RFID card reader can’t work-alone and it needs to work with Wiegand protocol access controller, such as access control panel, fingerprint device or master controller.
Support wiegand 26bits or wiegand 34bits output format.
Ultra-low power consumption, the standby current is less than 50mA.
It uses high performance MCU to ensure stable performance, and low-power circuit makes the service life longer.
Widely used in factories, houses, residential quarters, offices, mechanical and electrical control equipment and so on.