UHPPOTE Wired Emergency Fire Alarm Station 9-28VDC Conventional Dual Action Manual Call Point

Price: $21.30
(as of Feb 15, 2023 13:15:13 UTC – Details)

Product Description

Description

The conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches. One 470 ohm resistor is used on the PCB board between Zone+ and Zone- when the switch inside is closed. So the conventional fire alarm is only used with conventional control panel, it is forbidden to be used to other system.

Operation:

The manual call points provide a textured finger-hold area that includes Braille text. In addition to PUSH IN and PULL DOWN text, there are arrows indicating how to operate the station, provided for non-English-speaking people.Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position , the word” ACTIVATED” appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag.Resetting the station is simple: insert the key, twist one quarter-turn, then open the station’s front cover, causing the spring-loaded operation handle to return to its original position. The alarm switch can then be reset to its normal(non-alarm) position manually(by hand) or by closing the station’s front cover, which automatically resets the switch.

Loop design and wiring:

The fire alarm control panel Zone wire can be connected to terminal loop(+), loop(-) unpolarized wire.If the manual call point is in the end of the zone wire, a 5.6K resistance should be connected to terminal loop(+),loop(-).

Installation:

Attenteion: All wiring must conform to applicable local codes, ordinances, and regulations.

Mounting indoor wall:

Attach mounting base to wall at 1.5 meter’s (59in) highConnect field wiring to terminalsTo attach product to mounting baseSecure product by tightening the one mounting screws in the front of the product housing

Attention:

Alarm host not included, need buy seperate

Package List:

1 x Manual call point2 x Keys1 x English manualTips: Please searc ASIN B06Y2Q49T5 to get the strobe siren.

Specifications:

Non UL-Certification ListedOperating voltage range: 9-28VDC VoltsAlarm resistance: 470ohm/1WOperating humidity: 10% to 93% relative humidity, non-condensingOperating temperature: -10℃ to 50℃ (14℉ to 122℉)Dimensions (LxWxH): 140x104x45mm / 5.51″x4.09″x1.77″Net Weight: 220g / 0.44lb

Attencion: Non UL-Certification Listed
Key lock available; Dual Action
The HC102 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches
Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position , the word” ACTIVATED” appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag.
Note: Call point can’t work alone, need work with alarm control panel